| View previous topic :: View next topic |
| Author |
Message |
Southern Belle
Joined: 20 Dec 2009
Posts: 419
|
 Posted: Fri Sep 07, 2012 4:49 pm Post subject: HELP wiring gauges 175 merc 1999 |
 |
|
anybody know where I can get hold of wiring diagram for my 1999
Merc / mariner gauges
I m about refit gauges to the new dash but am going to delete the speedo as i can use GPS
the wiring that was done before I bought it was a dogs breakfast and the reference photo's I took before removing are lost so I am after a diagram or info on where I can buy or download 1
thanx in advance Anthony
_________________
If it sounds too good to be true, its because
IT IS TOO GOOD TO BE TRUE.
|
|
| Back to top |
|
 |
Snooks
Joined: 11 Feb 2004
Posts: 749
|
| Posted: Fri Sep 07, 2012 7:23 pm Post subject: |
|
|
Do you just want to know which coloured wires go where? from the control box to gauges
Gray = Tach
Purple = 12volt ignition
Black = Ground
Brown/White = Tilt/Trim sender
Tan = Temp gauge
These are standard let me know if you need anymore .
Also you will have to make jump wires from the lights to the 12v ingnition source.
Cheers Ben |
|
| Back to top |
|
|
Southern Belle
Joined: 20 Dec 2009
Posts: 419
|
| Posted: Sat Sep 08, 2012 1:13 pm Post subject: |
|
|
thanx for reply I had that sorted, couldnt work out why I had 2 power wires comin of the first gauges light terminal but after a qwik chat to spiro i realised the second power wire ran to switch in the dash
_________________
If it sounds too good to be true, its because
IT IS TOO GOOD TO BE TRUE.
|
|
| Back to top |
|
|
|
